1

Clean up the space from cement, dust, papers and dirts. Prepare the suitable size of LeichtBric AAC, near to the site. Prepare Base Plaster mortar LM 101 used as the base and Thinbed LM 301/306 as the adhesive material.

2

Fill up 1/3 of the bucket with water and slowly mix Base Plaster, using mixer until they are mixed evenly, with ratio 4 - 4,5 kg mortar for every 1 liter of water.

3

Apply the first mortar Base Plaster LM 101, about 1 - 3 cm thick as the base using the trowel.

4

Place the LeichtBric on top of the base.

5

Tap with rubber mallet to fix. Then, check the evenness with water pass.

6

Next step, mix mortar Thinbed LM 301/306 with water following the suggested mixing ratio.

7

Pour mortar Thinbed LM 301/306 on top of the LeichtBric with a trowel. Pull out trowel carefully to allow Thinbed LM 301/306 spread evenly, creating 3 - 5 mm thickness of pattern. Clean up the surface of the block and check the evennes with rubber mallet and water pass.

8

Clean up the leftover mix for a clean, nice fine wall. If necessary, use sand paper to smooth the surface.